Connected devices registration

Another useful feature in Keenetic internet centers is the ability to register home network devices.

After registration of your device you'll have more flexibility in managing and protecting your home network.

Registration allows you to indenify the device based on description that you can set. Beside you can assign the permanent ip-address to your device, limit the bandwidth, create schedule, set up the port forwarding rules or deny Internet access.

By default, all devices connected to the Internet center appear on the 'Device List' page in the 'Unregistered devices' section. To register, click on the device entry.

list-01-en.png

A window showed below will appear. Use 'Host name' field to change the device's name (for your convenience) or leave it unchanged. Click 'Register' to register the device.

list-02-en.png

After that device will appear in the 'Registered devices' list.

list-03-en.png

By click on registered device you will see a window with it's settings. Here you can specify access profile, work time shedule, bandwidth limit, assign the permanent ip-address to your device, add the port forwarding, check additional info about connection.

list-04-en.png

To limit the bandwidth enable the appropriate option and specify the necessary bandwidth using kbps or Mbps.

NOTE: Important! The bandwidth limit you set will be applied both for incoming and outgoing traffic.

If necessary you can use bandwidth limitation based on schedule. 

Detailed information about bandwidth limitation settings you can find in article: Speed limitation of connected devices

If you want device to receive a permanent IP address from the Internet center each time it is turned on, enable this option and specify the IP address.

list-05-en.png

 

Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.