Power adapter characteristics

Keenetic routers use the following supplied DC power adapters:

Router Model Power Adapter
Keenetic Hero (KN-1011) 12V 2A
Explorer (KN-1613) 12V 1A
Keenetic Carrier (KN-1711/1713) 12V 1A
Keenetic Speedster (KN-3010/3012) 12V 1А
Keenetic Carrier DSL (KN-2111) 12V 1.5A
Skipper DSL (KN-2112) 12V 1.5A
Keenetic Skipper (KN-1910/1912) 12V 1.5A
Keenetic Titan (KN-1810) 12V 3A
Keenetic Titan (KN-1811) 12V 2.5A
Keenetic Hero 4G+ (KN-2311) 12V 2A
Keenetic Hero 4G (KN-2310) 12V 2A
Skipper 4G (KN-2910) 12V 1.5A
Runner 4G (KN-2211/2212) 12V 1A
Keenetic Runner 4G (KN-2210/2211) 9V 0.85A
Keenetic Hero DSL (KN-2410) 12V 2A
Keenetic Sprinter (KN-3710) 12V 1А
Keenetic Hopper (KN-3810) 12V 1.5A
Keenetic Hopper DSL (KN-3610) 12V 1.5A
Starter (KN-1110/1111) 9V 0.6A
Starter (KN-1112) 12V 0.5A
Keenetic Orbiter Pro (KN-2810)* 12V 1А
Keenetic Voyager Pro (KN-3510)* 12V 1.5A

* - In addition to an external power supply, the unit can also be powered via PoE.

NOTE: Important! A power adapter is included with the individual Orbiter/Voyager package but is not included in the 4-pack set.

All Keenetic models are powered from 100–240 V 50/60Hz AC power. The power adapters have a rectified stabilized output voltage of 9/12 V with a DC not exceeding 3.0 A.

 

Was this article helpful?

59 out of 86 found this helpful