With the help of Keenetic you can connect to a public VPN service, office network, or other Keenetic through any Internet connection. There are also ISPs that provide access to the Internet using VPN technology.
In terms of compatibility, you can connect via PPTP, OpenVPN, L2TP/IPsec (L2TP over IPsec), SSTP, IPsec from any Keenetic router.
Having such a universal VPN client is especially useful if there is no public IP address on one side of the network connection (for example, to access the country house from your appartment).
In addition to the VPN client function, any, even the junior Keenetic model has similar VPN servers in its arsenal: PPTP, OpenVPN, L2TP/IPsec, SSTP, IPsec (Virtual IP).
On the 'Other connections' page, you can configure VPN connections to remote networks and VPN servers.
1. In the 'VPN Connections' section, click 'Create connection'.
In the 'VPN connection settings' window, select the required protocol in the 'Type' field and then configure the connection.
Detailed information on how to set up connections can be found in the articles:
TIP: Tip: If you want to use the newly created connection to access the Internet, assign this connection the highest priority. You will find information about the priorities in the 'Connection priorities' article.
2. To create an IPsec VPN in the 'IPsec connections' section, click 'Create connection'.
Then specify the connection parameters in the 'IPsec connection setup' window.
An example of how to combine two local networks over the Internet over IPsec can be found in the article 'IPSec VPN site-to-site'.